Leading experts in high speed machining will make up the international committee of the HSM Conference 2018

Date 06-04-2018 IK4-TEKNIKER Tags Congresses .

A select group of specialists from the sector make up the board in charge of evaluating the papers which will be presented in the fourteenth edition of the event.

A large and diverse group consisting of leading experts in high speed machining will be those responsible for evaluating the papers presented in the fourteenth edition of the International Conference on High Speed Machining 2018, which is to be held on the 17th and 18th of April at the Kursaal in San Sebastián.

Amongst the professionals who make up the scientific committee are:

  • Prof. Eberhard Abele, PTW, Darmstadt, Germany
  • Prof. Yusuf Altintas, The University of British Columbia, Vancouver, Canada
  • Dr. Ana Aranzabe, IK4-TEKNIKER, Spain
  • Prof. Mikel Arizmendi, TECNUN, Spain
  • Prof. Pedro Arrazola, Mondragón University-MGEP, Spain
  • Dr. Iban Arriola, IK4-TEKNIKER, Spain
  • Dipl. Ing. Javier Arzamendi, IK4-TEKNIKER, Spain
  • Dr. David Barrenetxea, IK4-IDEKO, Spain
  • Dr. Xavier Beudaert, IK4-IDEKO, Spain
  • Prof. Fritz Bleicher, TU - Wien - IFT, Austria
  • Prof. Christian Brecher, WZL-RWTH, Aachen University, Germany
  • Prof. Erhan Budak, Sabanci University, Turkey
  • Prof. Alain D´Acunto, Ecole Nationale Supérieure d’Arts et Métiers, France
  • Prof. Berend Denkena, IFW, Leibniz Universität Hannover, Germany
  • Prof. Kaan Erkorkmaz, Waterloo University, Canada
  • Prof. Manuel Estrems, Univ. Pol. Cartagena, Spain
  • Prof. Stépán Gàbòr, Budapest University, Hungary
  • Dipl. Ing. Javier García, IK4-TEKNIKER, Spain
  • Prof. Ning He, Nuaa, National University of Aeronautics and Astronautics, Nanjing, China
  • Dr. Zheng Hongyu, Singapore Institute of manufacturing Technology, Singapore
  • Prof. Steffen Ihlenfeldt, Technical University Dresden, Germany
  • Prof. Krzysztod Jemielniak, Technology University- Warsaw, Poland
  • Prof. Bernhard Karpuschewski, Otto-von-Guericke University Magdeburg, Germany
  • Prof. Petr Kolar, RCMT, CTU Prague, Czech Republic 
  • Prof. Aitzol Lamikiz, ETSII - UPV-EHU, Spain
  • Prof. Christophe Lescalier, Ecole Nationale Supérieure d’Arts et Métiers, France
  • Prof. Liang Li, Nuaa, National University of Aeronautics and Astronautics, Nanjing, China
  • Prof. Zhanqiang Liu, Shandong University, China
  • Dipl. Ing. Rafael Lizarralde, IK4-IDEKO, Spain
  • Prof. Luis Norberto López De Lacalle, ETSII - UPV-EHU, Spain
  • Dipl. Ing. Dieter Lung, WZL-RWTH, Aachen University, Germany
  • Prof. Hans-Christian Möhring, Otto-von-Guericke University Magdeburg, Germany
  • Dr. Jokin Muñoa, IK4-IDEKO, Spain
  • Prof. Tuğrul Özel, Rutgers University, USA
  • Prof. Erdem Öztürk, Sheffield University - AMRC, UK
  • Prof. Hildegard Perez, UNIV. Leon, Spain
  • Prof. Gerard Poulachon, Ecole Nationale Supérieure d’Arts et Métiers, France
  • Prof. Mustafizur Rahman, National University of Singapore, Singapore
  • Prof. Ibrahim Sadik, Sandvik, Sweden
  • Dipl. Ing. Carmen Sanz, IK4-TEKNIKER, Spain
  • Prof. Matej Sulitka, RCMT, CTU Prague, Czech Republic
  • Prof. Luis Uriarte, IK4-TEKNIKER, Spain
  • Prof. Michael Zaeh, IWB, Germany
  • Dr. Mikel Zatarain, IK4-IDEKO, Spain
  • Prof. Pavel Zeman, CTU Prague - RCMT, Czech Republic

The event will cover aspects related with high-performance machining, texturing and additive manufacturing.

More information

For further information and registration, visit the HSM 2018 conference website.